Magellan GPS Tracker - Manual (Page 54)

44 Magellan GPS Tracker
Working with Map ‘N Track Route
The Map ‘N Track Route consists of track points downloaded from the
Map ‘N Track PC software (an optional accessory; see accessory list). With
Map ‘N Track PC software, you can generate a route manually or automati-
cally using the Point-to-Point navigation function. If a route has 30 legs or
less, it can be downloaded to the receiver as a standard route. If the route has
more than 30 legs, it is downloaded to the receiver as a track and stored in
Track History. A track can be up to 1200 points in size.
Activating. By activating the Map ‘N Track Route
at the top of the ROUTE MENU, you can
navigate the track created by Map ‘N Track. This
turns the Track History logging off to keep from
overwriting track points in memory. The top of
the navigation screens will indicate TO:
LEGXXXX where XXXX is between 0 to 1200.
As you navigate with the receiver and pass indi-
vidual track points, the legs will switch and
countdown until you reach LEG 0 which is your
final destination.
There may be some track points that are close to each other causing
the receiver to skip 1 or more of these legs.
If a track is not downloaded from the Map ‘N Track software, activating
Map ‘N Track will allow navigation on the track points in Track History.
You will be navigating from the first created track point to the last track
point, making a reverse of BACKTRACK.
Deactivate. When Map ‘N Track route is turned off, Track History logging
begins. The track points will be overwritten once the receiver records new
position fixes.
Reverse. This reverses the Map ‘N Track route or the track in Track
History.
Delete. This erases the track points in Track History.
Backtrack. This activates the BACKTRACK Route by saving the Track
History as a 30 leg route and activating it.
ROUTE MENU
n
m
DISTANCE
0.00
LEGS
2
MAP N
TRACK
1 FISH
...CAMP
2 EMPTY
3 EMPTY
4 EMPTY