Magellan GPS Tracker User Manual

Page 67

Advertising
background image

Magellan GPS Tracker

57

Selecting NAV Units

You can choose the units of measure used by your receiver. NAV

UNITS gives you the options of MILES/MPH, NM/KNOTS and KM/

KPH.

Press MENU, from any screen, highlight

SETUP and press ENTER. Highlight NAV

UNITS and press ENTER. A pop-up menu

will be displayed, highlight your choice and

press ENTER.

Default setting is MILES/MPH for land use in the United States and

KM/KPH for land use outside the United States.

Default setting is NM/KNOTS for marine use.

Selecting North Reference

The GPS Tracker uses magnetic north as a default reference for all navigation

computations. You can change this to true north (good, if you are using a

map) or back to magnetic north (default, good to use if you are using a

compass) under SETUP.

Press MENU, from any screen, highlight SETUP and press ENTER.

Highlight NORTH REF and press ENTER.

A pop-up menu will be displayed, highlight

your choice and press ENTER.

Default setting is MAGNETIC.

NAV UNITS

MILES/MPH

NM/KNOTS
KM/KPH

WPT NAMES

OFF

ON

WPT NAMES

OFF

ON

WPT NAMES

OFF

ON

NORTH REF

TRUE

MAGNETIC

Advertising