Magellan GPS Tracker - Manual (Page 41)

Magellan GPS Tracker 31
Saving Your Position Fix with a User-Created Name
To save a waypoint with a user-created name,
press MARK, press ENTER and the
ARROWs to enter alphanumeric characters.
Once you have entered the name, press
MARK again to save the waypoint.
You have the option of creating a message when you are naming
your waypoint. This will be explained in the Working with Way-
points section.
Creating a Waypoint
A waypoint is a recorded position that can be used in a route or a GOTO.
You can save up to 500 waypoints in your GPS Tracker and refer back to
them at any time, as long as the waypoints have been saved.
Press MARK. To create the waypoint,
highlight the data field you wish to change
and press ENTER. Use the ARROWs to
input the data and press ENTER to exit the
edit mode for that data field. To save the
changes you have made, press MARK or
highlight SAVE WPT and press ENTER.
MARK
34˚06.56N
117˚49.60W
900 FT
11:23:35PM
12JUN97
CREATE MSG
SAVE WPT
SAVE TO RTE
DOC K
MARK
34˚06.56N
117˚49.60W
900 FT
11:23:35PM
12JUN97
CREATE MSG
SAVE WPT
SAVE TO RTE
DOC K