Magellan GPS Tracker - Manual (Page 58)

48 Magellan GPS Tracker
Selecting Anchor Alarm
The Anchor alarm will notify that you have moved from the set position.
For example, while boating, you can set your Anchor alarm. Once anchored,
your boat begins to drift from the set position, a pop-up window will appear
to notify that you are moving.
While viewing the Alarm/Message screen,
highlight the ANCHOR ALARM and press
ENTER. A pop-up screen will appear with
your choices for alarm settings of OFF, 100,
250 or 500 feet. Highlight your selection and
press ENTER. The beeper will sound when
the GPS position is at a distance greater than
the distance you have chosen. The alarm will
sound until you turn it off or the condition is
corrected.
The default is OFF.
Selecting Arrival Alarm
The Arrival alarm will notify you when you are within the arrival circle of the
destination waypoint.
While viewing the Alarm/Message screen,
highlight the ARRIVAL ALARM and press
ENTER. A pop-up screen will appear with
your choices for alarm settings of OFF, 100,
250, 500 feet, 0.2, 0.5 and 1.0 miles. High-
light your selection and press ENTER.
The alarm will sound and a pop-up window will appear when the GPS
position is within the arrival circle distance you have chosen. The pop-
up window will display the arrival circle distance as well as any message
you have inputted for the waypoint. The alarm will sound until you
turn it off.
The default is OFF.
WPT NAMES
OFF
ON
WPT NAMES ANCHOR
OFF
100FT
250FT
500FT
WPT NAMES
OFF
ON
WPT NAMES ARRIVAL
OFF
100FT
250FT
500FT
0.2 MI
0.5 MI
1.0 MI