Intelligent Motion Systems MDriveAC - Manual (Page 40)

2-13 Part 2: Interfacing and Configuring
The color coding is illustrated in Figure 2.3.1.
IMS SPI Motor Interface Menu Options
File
> Open: Opens a saved *.mot (Motor Settings) file.
>
Save: Saves the current motor settings as a *.mot file for later re-use
> Save As
> Exit - Disconnects from the device and opens the Initialization Dialog.
View
> Motion Settings: Displays the Motion Settings screen
>
IO Settings: Displays the IO Settings Screen
> Part and Serial Number: Displays the part and serial number
Red: Out of Range Value.
The Set Button will disable
as the the Motor Interface will
not allow an out of range value
to be stored.
Blue: New Value which has not yet
been set to NVM.
Black: This is the value
Currently Stored in NVM
Figure 2.3.1: SPI Motor Interface Color Coding
Perform File
Operation
Open Motor Settings
File (*.mot)
Save Motor Settings
Save Motor Settings As
Exit the Motor Interface
Figure 2.3.2: SPI Motor Interface File Menu
View Settings
Screen
Motion Settings Screen
I/O Settings Screen
Read-Only Part
and Serial Number Screen
Figure 2.3.3: SPI Motor Interface View Menu