IBM 704 User Manual
Page 100
Removing the Side Covers
3. Grip the two built-in handles at the back edge of the cover.
12
Attention
: Do not damage or displace the
electromagnetic interference (EMI) gaskets mounted on
the cover. Replace any damaged gaskets, or your server
might not meet EMI requirements.
4. Pull firmly and evenly with both hands to slide the cover
toward the back. The cover stops after about an inch.
5. Pull the cover out from the server toward you, to disengage the
bottom and top rows of tabs from the notches in the chassis.
6. Set the cover aside.
11
Attention:
For proper cooling and airflow, always replace
the top and side covers before turning on the server.
Operating the server with the covers removed might damage
server components.
82
PC Server 704 User's Handbook