IBM 704 - Manual (Page 124)

Removing a Microprocessor
2. Select the processor board that you will remove. Locate the
appropriate processor-board connector ( 2 or 4 ) on the
system board 1 . The primary processor-board connector is
located at 2 . The secondary processor-board connector is
located at 4 .
1
2
3
4
3. Disconnect the processor board 3 from the system board by
rotating the processor-board corner handles outward to a
90-degree angle from the processor board.
4. Grasp the processor-board corner handles and carefully slide the
processor board out of the slot.
5. Place the processor board on a flat, static-protective surface.
106 PC Server 704 User's Handbook