IBM 704 User Manual
Page 320
Advertising
Setting System-Board Configuration Switches
7. Turn off the server and the monitor.
8. Disconnect the power cord from the server and monitor.
9. Remove the bottom processor board.
10. Slide switch S6A1-2 to Off.
11. Replace the bottom processor board.
12. Complete the installation (see “Completing the Installation” on
page 201).
13. Run the System Configuration Utility to specify a new
administrative password, user password, or both (see “Defining
Security” on page 52).
302
PC Server 704 User's Handbook
Advertising