Installing a drive in a hot-swap bay – IBM 704 User Manual
Page 191
Advertising
Installing Internal Drives
Installing a Drive in a Hot-Swap Bay
Before you begin:
Be sure you have:
Read “Electrical Safety” on page 75 and “Handling
Static-Sensitive Devices” on page 77 (or your safety booklet).
Unlocked and opened the short bay door
Opened the right front exterior door (see “Preparing to
Install Options” on page 78 and “Preinstallation Steps (All
Bays)” on page 163).
Unlocked any padlock securing the EMI metal panel, and
remove the lock.
Notes:
1. The right-hand bays support hot-swap drives only.
2. You do not have to turn off the server to install hot-swap drives
in these bays. However, you must turn off the server when
performing the steps that involve installing or removing cables.
Chapter 4. Installing Options
173
Advertising