IBM 704 - Manual (Page 92)

Before You Begin
If your server came with a RAID adapter preinstalled, you must
configure your disk arrays after you install hard disk drives, as
described in “Installing Internal Drives” on page 156. In this
case, follow the instructions in the RAID adapter documentation
after installing the drives. Return here to install your remaining
options, if applicable. See Chapter 3, “Configuring Your
Server” on page 39 for additional details about configuration,
and a description of your server utility programs.
Become familiar with the safety and handling guidelines
specified under “Safety Information” on page v, “Electrical
Safety” on page 75 (or your safety booklet), and “Handling
Static-Sensitive Devices” on page 77. These guidelines will help
you work safely while working with your server or options.
In addition, you will need the following items:
– Antistatic wrist strap
– Standard-tip screwdriver with .375- to .500-inch by .04-inch
thick blade
– Phillips screwdriver with a #1 bit
– Phillips screwdriver with a #2 bit
74 PC Server 704 User's Handbook