Integra DTR-5.5 - Manual (Page 19)

19
Remote Controller —Continued
M FR & FF [ ]/[ ] buttons
The FR [ ] button is used to start fast reverse. The
FF [ ] button is used to start fast forward.
N Stop [ ] button
This button is used to stop playback.
O Random button
This button is used with the random playback func-
tion.
P Memory button
This button is used with the memory playback func-
tion, which allows you to create a custom playlist of
tracks.
TAPE mode is used to control an Integra cassette
recorder connected to the AV receiver via
.
To set the remote controller to TAPE mode, press the
[Tape] Remote Mode button.
For double cassette decks, only Deck B can be con-
trolled.
1 Play [ ] button
This button is used to start playback.
2 Previous & Next [ ]/[ ] buttons
The Previous [ ] button is used to select the pre-
vious track. During playback it selects the begin-
ning of the current track. The Next [
] button is
used to select the next track.
The Previous and Next [ ]/[ ] buttons may not
work properly with some cassette tapes depending
on how they were recorded.
3 Reverse Play [ ] button
This button is used to start reverse playback.
4 Rec [ ] button
This button is used to start recording.
5 VOL button
This button is used to adjust the volume of the AV
receiver.
6 Muting button
This button is used to mute the AV receiver.
7 Rewind & FF [ ]/[ ] buttons
The Rewind [ ] button is used to start rewind. The
FF [ ] button is used to start fast forward.
8 Stop [ ] button
This button is used to stop playback.
TAPE Mode