Connecting the av receiver —continued, Connecting your speakers, Speaker configuration – Integra DTR-5.5 User Manual

Page 22: Using dipole speakers, Connecting a powered subwoofer, Attaching the speaker labels

Advertising
background image

22

Connecting the AV receiver

—Continued

Speaker Configuration

For the best surround-sound experience, you should con-
nect seven speakers and a powered subwoofer.
The following table indicates the channels you should
use depending on the number of speakers that you have.

*If you’re using only one surround back speaker, connect it to
the left (L) SURROUND BACK SPEAKERS terminals.

No matter how many speakers you use, a powered sub-
woofer is recommended for a really powerful and solid
bass.
To get the best from your surround-sound system, you
need to set the speaker settings by using the supplied
setup microphone (see page 39).

Using Dipole Speakers

You can use dipole speakers for the surround left and
right and surround back left and right speakers. Dipole
speakers output the same sound in two directions.
Dipole speakers typically have an arrow printed on them
to indicate how they should be positioned. The surround
left and right dipole speakers should be positioned so that
their arrows point toward the TV/screen, while the sur-
round left and right dipolar speakers should be positioned
so that their arrows point toward each other, as shown.

Connecting a Powered Subwoofer

Using a suitable cable, connect the AV receiver’s SUB-
WOOFER PRE OUT to an input on your powered sub-
woofer, as shown. If your subwoofer is unpowered and
you’re using an external amplifier, connect the SUB-
WOOFER PRE OUT to an input on the amp.

Attaching the Speaker Labels

The AV receiver’s positive (+) speaker terminals are
color-coded for ease of identification. (The negative (–)
speaker terminals are all black.)

The supplied speaker labels are also color-coded and you
should attach them to the positive (+) side of each
speaker cable in accordance with the above table. All you
need to do then is to match the color of each label to the
corresponding speaker terminal.

Connecting Your Speakers

Number of speakers:

2

3

4

5

6

7

Front left

Front right

Center

Surround left

Surround right

Surround back*

Surround back left

Surround back right

2

1

3

4

2

1

3

4

5

7

8

6

5

6

7

8

TV/screen

TV/screen

1. Subwoofer
2. Front left speaker
3. Center speaker
4. Front right speaker
5. Surround left speaker

6. Surround right speaker
7. Surround back left

speaker

8. Surround back right

speaker

Dipole speakers

Normal speakers

Speaker terminal

Color

Front left, Zone 2 left

White

Front right, Zone 2 right

Red

Center

Green

Surround left

Blue

Surround right

Gray

Surround back left

Brown

Surround back right

Tan

R

L

IN 1

IN 2

IN 3

FRONT

SURR

CENTER

FRONT

SURR

CENTER SURR BACK

DVD

CD

VIDEO 3

VIDEO 2

VIDEO 1

VIDEO 3

VIDEO 2

PRE OUT

VIDEO 1

IN

IN

IN

OUT

OUT

IN

IN

OUT

OUT

TAPE

SUB

WOOFER

SUB

WOOFER

SUB

WOOFER

MONITOR

OUT

DVD

COMPONENT VIDEO

P

B

Y

P

R

IN

OUT

IN

IN

IN

OUT

R

L

R

L

REMOTE

CONTROL

ZONE 2

OUT

V

S

IN 1

IN

2

OUT

OPTICAL

IN1

IN2

IN3

IN

4

OUT

COAXIAL

DIGITAL

RS

232

R

L

PHONO

IN

GND

LINE INPUT

LINE INPUT

Powered

subwoofer

Advertising
This manual is related to the following products: