Integra DTR-5.5 - Manual (Page 57)

57
Basic Operation —Continued
Presetting Radio Stations
You can store up to 40 of your favorite radio stations as
presets.
Selecting Preset Stations
Deleting Presets
Displaying Radio Information
1 Tune into the station that you
want to store as a preset.
2 Press the [Memory] button.
The MEMORY indicator appears and
the preset number flashes.
3 While the MEMORY indicator is
displayed (about 8 seconds), use
the Preset [
]/[ ] buttons to
select a preset from 1 through 40.
In this example, preset #3 is selected.
4 Press the [Memory] button again
to store the station.
The station is stored and the preset
number stops flashing.
Repeat this procedure for all your
favorite radio stations.
1 Use the [TUNER] input selector
button to select either AM or FM.
2 Use the Preset [ ]/[ ] buttons,
or the remote controller’s CH [+/
–] button to select a preset.
Standby
Zone 2
3 2, 4
1 Select the preset that you want to
delete.
See the previous section.
2 While holding down the [Mem-
ory] button, press the
[Tuning MODE] button.
The selected preset is deleted and its
number disappears from the display.
1 Press the [Display] button
repeatedly to cycle through the
available information.
Standby
Zone 2
2
Standby
Zone 2
2
Band, preset # &
frequency
Listening mode