Figure2-3 removing the backplate, 2 remove the screw holding the expansion slot’s ba, 3 insert the 3c619c adapter into the empty expansi – IBM 09-0572-000 User Manual
Page 24: 4 replace the pc’s cover, 5 proceed to the next section, “connecting to the
Advertising
2-6
C
HAPTER
2: I
NSTALLING
THE
3C619C A
DAPTER
Figure 2-3 Removing the Backplate
2 Remove the screw holding the expansion slot’s backplate,
as shown in Figure 2-3.
Your PC may look different from the one illustrated, particularly if
it is an EISA PC. With an EISA PC, use any empty slot.
3 Insert the 3C619C adapter into the empty expansion slot,
as shown in Figure 2-4, and secure it with the screw you
removed earlier.
4 Replace the PC’s cover.
5 Proceed to the next section, “Connecting to the Network.”
Advertising