Mmio register write/read test failure, Check the rom base address setting on the adapter, Run the test three times with a delay of at least – IBM 09-0572-000 User Manual
Page 66: Boot prom test failure, Refer to the “configuration options” section in ap, Aip checksum test failure, Shared ram boundary/domain test failure, Make sure the ram base address is aligned accordin, Make sure the shared ram address does not conflict, Mmio register write/read test failure 7-11
When Tests Fail
7-11
The following information is displayed on the screen,
indicating what to do when the specific test fails.
MMIO Register Write/Read Test Failure
■
Check the ROM base address setting on the adapter and
make sure that it is not being used by another device.
■
Run the test three times with a delay of at least 30 seconds
between each test. If the error persists, power down the PC
and try once more.
Boot PROM Test Failure
■
Check the ROM base address setting on the adapter and
make sure that it is not being used by another device.
■
Refer to the “Configuration Options” section in Appendix B
for more information.
AIP Checksum Test Failure
■
Check the ROM base address setting on the adapter and
make sure that it is not being used by another device.
■
Run the test three times with a delay of at least 30 seconds
between each test. If the error persists, power down the PC
and try once more.
Shared RAM Boundary/Domain Test Failure
■
Make sure the RAM base address is aligned according to the
selected shared RAM size.
■
Make sure the shared RAM address does not conflict with the
adapter ROM or another device.