Installing the os/2 network driver for netware, Installing the server driver for netware, Netware systems with multiple adapters – IBM 09-0572-000 User Manual
Page 45: Installing the os/2 network driver for netware 5-5, Installing the server driver for netware 5-5, Netware systems with multiple adapters 5-5
Installing the Novell NetWare Driver
5-5
Installing the OS/2 Network Driver for NetWare
The TokenDisk diskette includes the Novell NetWare OS/2
ODI driver (\NETWARE\ODI\3CTOKEN.SYS). Instructions for
installing this driver are provided in the
\NETWARE\ODI\OS2REQ.TXT file.
Installing the Server Driver for NetWare
The TokenDisk diskette includes the driver and files for Novell
NetWare 3.12 and 4.X servers. Refer to Novell documentation
for instructions for using the INSTALL.NLM file to install the
drivers for the 3C619C adapter.
NetWare Systems with Multiple Adapters
If you are installing more than one 3C619C adapter, you must
modify your NET.CFG or AUTOEXEC.BAT file to load a driver
for each adapter. Parameters must be added to the file to
distinguish each adapter attached to the same driver.
Below is a sample NET.CFG file for an ISA PC with two
3C619C adapters configured in 3Com mode:
LINK DRIVER 3CTOKEN
PORT 200
LINK DRIVER 3CTOKEN
PORT 240
Mode
Parameter
Values
ISA
PORT
200–2E0, 300–3E0, A20, A24
EISA
SLOT
1–8
IBM
PRIMARY
Optional for first adapter
installed in IBM mode
ALTERNATE
Use when second adapter is
installed in IBM mode