Disabling rpl, 1 boot your pc under dos, 2 make sure that the backup copy of the tokendisk – IBM 09-0572-000 User Manual
Page 52: 3 at the diskette prompt, type, 4 from the install pull-down menu, select configur, 5 using the arrow keys, move to boot prom, 6 press [enter] and select disable, 7 press [enter, 8 select ok and press [enter] to save the setting, 9 remove the diskette from the drive and reboot th
Advertising
5-12
C
HAPTER
5: I
NSTALLING
N
ETWORK
D
RIVERS
Disabling RPL
To disable RPL:
1 Boot your PC under DOS.
2 Make sure that the backup copy of the
TokenDisk diskette
is in a floppy drive on your PC.
3 At the diskette prompt, type:
3TOKDIAG [Enter]
4 From the Install pull-down menu, select Configure Adapter.
5 Using the arrow keys, move to Boot PROM.
6 Press [Enter] and select Disable.
7 Press [Enter].
8 Select OK and press [Enter] to save the setting.
9 Remove the diskette from the drive and reboot the PC.
This completes the description of how to use RPL with the
3C619C adapter.
Advertising