IBM 09-0572-000 - Manual (Page 49)

Updating the Current NDIS Driver 5-9
Updating the Current NDIS Driver
If you are updating an existing NDIS driver (rather than
installing one for the first time), follow these steps:
1 From the main menu, select Network Drivers and press
[Enter].
2 Select NDIS Driver Installation and Information.
3 Select Update NDIS Driver and press [Enter].
This option will update your current driver to the latest
version. The NDIS 2.01 drivers are TLNK3.DOS and TLNK3.OS2.
4 Exit the program and remove the TokenDisk diskette.
5 Reboot your PC.
This completes the procedure for updating the NDIS 2.01 drivers.
Using IBM Drivers
The 3C619C adapter is fully IBM-compatible. Because of this,
the 3C619C adapter can use the same drivers as IBM 16/4
Token Ring Adapters.
Obtaining IBM Network Drivers
Obtain IBM token ring drivers for the 3C619C adapter in one
of the following ways:
■
Copy IBM 16/4 Token Ring Adapter drivers supplied with your
network operating system.
■
Use the Remote Program Load (RPL) program to download IBM
drivers from the network. Follow the procedures described in
the next section, “Using Remote Program Load (RPL).”
■
Use the IBM 16/4 Token Ring Adapter drivers that accompany
the latest version of IBM’s LAN Support Program.
With IBM drivers, use only IBM mode settings.