Intelligent Motion Systems UDAS-1001E - Manual (Page 10)

1- 3
UDAS SYSCHECK
The SYSCHECK application enables you to verify the UDAS installation is functioning properly.
SYSCHECK can also be used during the calibration procedure and for simple data acquisition.
U-Link Software Libraries for Windows 98
These function libraries allow custom application development using C/C++ and Visual Basic.
LabView 5.0 Support Library
Allows the use of UDAS with LabVIEW.
UDAS Device Driver
To use the UDAS unit, Microsoft Windows requires the UDAS device driver.
Visual Designer Support Library
The Visual Designer Support Library allows the use of the UDAS device in Visual Designer 4.0
applications.
Analog Input Analog Input
The UDAS unit features:
•
16 Single-ended or 8 Differential Analog Inputs
(±0.05 V, ±0.1 V, ±0.5 V, ±1 V, ±5 V, ±10 V, and 0-0.1 V, 0-1.0 V, 0-10V programmable input
ranges).
•
Analog Input resolution: 12-bit (1 part in 4096).
•
Up to 100 kHz input sample rate (built-in timebase generator).
•
Analog Trigger function to start analog-to-digital conversions.
Analog Output Analog Output
The UDAS unit features:
•
Up to 100 kHz output rate (built-in timebase generator).
•
2 analog outputs at 12-bit resolution (±10V output range, 1 part in 4096).
•
Waveform generation