Intelligent Motion Systems UDAS-1001E - Manual (Page 50)

Accessories
B-2
B.1 B.1 UDAS Termination Panels UDAS Termination Panels
The Termination Panel plugs directly into the I/O connectors of the UDAS unit, providing 32
channels of digital I/O through four screw-type terminal strips. Stand-off nuts on the UDAS unit
secure the termination panel in place.
B.1.1 B.1.1 PCI-20429T-1 Multifunction PCI-20429T-1 Multifunction Termination Panel Termination Panel
This termination panel plugs directly into the 50-pin I/O connector of the UDAS unit. Screw
terminals are provided on the panel to interface all analog and digital I/O lines with external
signals or devices. The PCI-20429T-1 secures to the UDAS unit’s back panel using the mounting
screws provided.
FIGURE B.1 Securing the PCI-20429T-1 to the UDAS unit
Access to all signals on the 50-pin I/O connector, except for +5 V, is provided through four 12-
position terminal blocks. Two of these terminal blocks are used for analog input and output
connections while the other two are used for digital I/O, counter, rate generator out and external
input connections. Screw terminals enable signal wires to be securely fastened to the terminal
blocks.
PCI-20429T-1