Intelligent Motion Systems UDAS-1001E - Manual (Page 8)

1-1
Chapter 1 Chapter 1 UDAS-1001E Series Data UDAS-1001E Series Data
Acquisition Systems Acquisition Systems
1.1 1.1 Introduction Introduction
The UDAS-1001E Series Data Acquisition Systems are stand-alone, multifunction, plug-and-play
data acquisition systems that connect to the Universal Serial Bus and operate using power
supplied through either the USB connector or an external power supply.
All of the systems feature analog inputs (8 differential, 16 single-ended), digital I/O (Two 8-bit
ports, each port configurable to input or output), and one counter channel. Selected models
include an analog output section.
The UDAS Models include:
UDAS-1001E-1
This is a stand alone unit for use with standard termination products.
UDAS-1001E-1G
This model is similar to the UDAS-1001E-1, without the housing for use in OEM applications or
other situations where a bare board is appropriate.
UDAS-1001E-2
This is a stand alone unit for use with standard termination products. It includes a two-channel
analog output with wave form generation.
UDAS-1001E-2G
This model is similar to the UDAS-1001E-2, without the housing for use in OEM applications or
other situations where a bare board is appropriate.
UDAS-1001E-3
This model has a multifunction data acquisition system with built-in termination.
UDAS-1001E-4
This model is similar to the UDAS-1001E-3, with built-in termination and analog outputs.