Intelligent Motion Systems UDAS-1001E - Manual (Page 29)

3-5
3.3.2.1 3.3.2.1 Analog Input Test Analog Input Test
Click the Analog In button to access a new window specific to analog input. The UDAS
SYSCHECK ANALOG INPUT dialog shown in FIGURE 3.3, UDAS SYSCHECK Analog Input
Test of a UDAS unit appears.
The analog input test performs software-based reading of the first 8 analog input channels on
UDAS units.
Select from the drop-down lists to select the Range, Gain, Single Ended/Differential configuration,
and Average (the number of readings to average from each channel).
Select either the Volts or Counts radio button to display the channel data in volts or counts.
Click the Read Channels button to acquire the input voltages to the UDAS unit. Each time that
you click the Read Channels button, the channel data is read by the UDAS unit and the display is
updated.
FIGURE 3.3 UDAS SYSCHECK Analog Input Test of a UDAS unit