Invacare LYNX LX-3PLUS EU User Manual

Page 34

Advertising
background image

Invacare Scooters

34

Part No. 1090132 Rev F

PROCEDURE 5

SEAT

REMOVING (FIGURE 2)

1. Remove the stability knob located under the seat on the frame post.

CAUTION

When the seat height adjustment pin is removed, the weight of the seat

assembly MUST be supported to prevent the seat from falling onto the

frame.

2. Perform one of the following:

A. For solid seat post and

adjustable seat post ZOOM-3 -

proceed to STEP 3.

B. For adjustable height seat post

- remove the seat height adjust-

ment pin from seat post and retain

for installation.

3. Lift seat assembly up and remove from

frame post.

INSTALLING (FIGURE 2)

WARNING

Ensure that seat is locked into the

forward position BEFORE and

DURING operation of the scooter.

Otherwise, injury to the user and/

or damage to the scooter may

result.

1. Position seat post of seat assembly into

frame post with seat in FORWARD

position.

NOTE: For adjustable height seat posts ensure that the adjustment holes align with the holes

on the SIDES of the frame post.
2. If necessary, rotate seat to the forward position. Refer to 90º SEAT SWIVEL ADJUSTMENT

in this procedure of the manual.

WARNING

Ensure that the seat height adjustment pin is properly engaged and locked.

Otherwise, injury and/or damage may result.
DO NOT use the stability knob to adjust the seat height. It is NOT designed

to support the weight of the user. Otherwise, injury to the user and/or dam-

age to the scooter may result.

3. Perform one of the following:

A. For solid seat post - lower seat assembly down until seat post rests on mount-

ing screw installed inside frame post.

B. For adjustable height seat post - lower seat assembly down to desired height

and install seat height adjustment pin through frame post and seat post and secure.

Refer to ADJUSTING THE SEAT HEIGHT in this procedure of the manual.

SEAT

NOTE: Only the Contour Seat shown for

clarity. The Deluxe Seat removes/installs in

the same manner.

FIGURE 2 - REMOVING/

INSTALLING THE SEAT

Stability

Knob

Frame

Post

Seat

Post

Seat

Pin Lock

Bend End of Pin Lock

AWAY From Pin

Seat Height

Adjustment Pin

Adjustable

Height Seat

Post

Advertising
This manual is related to the following products: