Invacare LYNX LX-3PLUS EU - Manual (Page 39)

Part No. 1090132 Rev F 39 Invacare Scooters
REMOVING/INSTALLING THE SEAT UPHOLSTERY/
CUSHION (FIGURE 8)
NOTE: This procedure applies to the Contour
Seat Only. Seat upholstery on the Deluxe seat
CANNOT be removed.
REMOVING
1. Unbutton the snap buttons of the seat
upholstery located on the rear of the
seat.
2. Remove seat upholstery and seat
cushion from seat.
INSTALLING
1. Install NEW/EXISTING seat cushion
onto seat.
2. Install NEW/EXISTING seat upholstery
onto seat.
3. Secure seat upholstery to seat with
rear snap buttons.
WARNING
Laundering or moisture will reduce flame retardation of the upholstery.
PROCEDURE 5 SEAT
SEAT
FIGURE 8 - REMOVING/
INSTALLING THE SEAT
UPHOLSTERY/CUSHION
Seat Cushion
Seat
Snap
Buttons
Seat
Upholstery
Seat
Upholstery