Replacing on-board battery charger (figure 11) – Invacare LYNX LX-3PLUS EU User Manual

Page 61

Advertising
background image

Part No. 1090132 Rev F

61

Invacare Scooters

REPLACING ON-BOARD BATTERY CHARGER (FIGURE 11)

1. Remove seat. Refer to REMOVING/INSTALLING SEAT in PROCEDURE 5 of this

manual.

2. Remove the rear shroud. Refer to REMOVING/INSTALLING THE REAR SHROUD

in PROCEDURE 9 of this manual.

3. Remove the floor basket. Refer to REMOVING/INSTALLING THE FLOOR BASKET

in this procedure of the manual.

4. Pull on-board battery charger partially out of front shroud.
5. Disconnect blue connector of on-board battery charger from blue connector of

battery wiring harness.

6. Disconnect white connector of on-board battery charger from white connector of

battery wiring harness.

7. Remove the EXISTING on-board battery charger.
8. Install NEW on-board battery charger by reversing STEPS 1-7.

FIGURE 11 - REPLACING ON-BOARD BATTERY CHARGER

On-Board

Battery

Charger

White

Connectors

Blue

Connectors

Front

Shroud

OPTIONS/REPLACEMENT PARTS

PROCEDURE 11

OPTIONS/REPLACEMENT PARTS

Advertising
This manual is related to the following products: