Invacare LYNX LX-3PLUS EU - Manual (Page 60)

Invacare Scooters 60 Part No. 1090132 Rev F
OPTIONS/REPLACEMENT PARTS PROCEDURE 11
MODEL PANTHER MX-4 (FIGURE 10)
NOTE: Prongs on lightbulb plug are not equally spaced around diameter. Once removed,
lightbulb plug can only be installed with prongs in the orientation in which they were removed.
1. Before removing lightbulb plug, place a scribe mark on a prong and the slot in which
it is positioned in. See DETAIL "A".
NOTE: When reassembling, the scribe mark will help align the prongs with the proper corre-
sponding slots on the headlight assembly.
2. To remove lightbulb plug, twist lightbulb plug COUNTERCLOCKWISE and remove
from headlight assembly.
3. Remove lightbulb from headlight assembly.
4. To install light bulb, align prong of NEW lightbulb with the slot in the head light
assembly and insert.
5. Install plug into headlight assembly at the orientation noted from above and twist
CLOCKWISE.
FIGURE 10 - REPLACING HEADLIGHT LIGHTBULBS
MODEL PANTHER MX-4
Headlight
Assembly
Plug
Prongs
Prong
Lightbulb
Notch
DETAIL "A" - BACK VIEW OF HEADLIGHT ASSEMBLY
Partial View of
Headlight
Assembly
Place scribe
mark on
prong.
Place scribe
mark near
corresponding slot
of headlight
assembly.
Lightbulb Plug
OPTIONS/REPLACEMENT PARTS