Folding/unfolding the back (figure 1) – Invacare LYNX LX-3PLUS EU User Manual

Page 40

Advertising
background image

Invacare Scooters

40

Part No. 1090132 Rev F

WARNING

After ANY adjustments, repair or service and BEFORE use, make sure

that all attaching hardware is tightened securely - otherwise injury or

damage may result.

FOLDING/UNFOLDING THE

BACK (FIGURE 1)

1. To fold, push back down towards seat.
2. To unfold, pull back up into the upright

position.

REMOVING/INSTALLING

BACK CUSHION/UPHOLSTERY (FIGURE 2)

1. Unbutton the snap buttons on the back upholstery.
2. Remove and replace foam insert and/or upholstery.
3. Secure back upholstery to back with snap buttons.
NOTE: Clean upholstery with warm DAMP cloth and mild detergent to remove superficial soil.

WARNING

Laundering or moisture will reduce flame retardation of the upholstery.

Snap

Buttons

Back

FIGURE 2 - REMOVING/INSTALLING BACK CUSHION/UPHOLSTERY

Back Cushion

w/Foam Insert

FIGURE 1 - FOLDING/UNFOLDING

THE BACK

Back

Seat

This Procedure Includes the Following:
Folding/Unfolding the Back
Removing/Installing the Back Cushion/Upholstery
Adjusting the Back Recline
Adjusting the Headrest

BACK

PROCEDURE 6

BACK

Advertising
This manual is related to the following products: