Invacare LYNX LX-3PLUS EU - Manual (Page 38)

Invacare Scooters 38 Part No. 1090132 Rev F
6. Secure all three (3) components
together with the four (4) EXISTING
mounting screws, lockwashers, and
washers in the following manner:
WARNING
The two (2) longer mounting screws
MUST be used to secure the rear of
the seat assembly together and the
two (2) shorter mounting screws
MUST be used to secure the front of
the seat assembly together. Other-
wise, damage to the seat and/or
injury to the user may result.
A. Use the shorter mounting screws
to secure the front of the seat
assembly together. Securely
tighten.
B. Use the longer mounting screws to
secure the rear of the seat assem-
bly together. Securely tighten.
7. Install the seat upholstery and cushion insert onto the seat. Refer to REMOVING/
INSTALLING THE SEAT UPHOLSTERY in this procedure of the manual.
8. Install the seat. Refer to REMOVING/INSTALLING THE SEAT in this procedure of
the manual.
USING THE ADJUSTABLE SEAT SLIDE (FIGURE 7)
NOTE: This option is only available on the Deluxe Seat, models PANTHER LX-4 and PANTHER
MX-4.
1. Lift up on the release lever.
2. Slide seat forward/backward to the
desired position.
3. Release lever to lock seat in position.
PROCEDURE 5 SEAT
SEAT
FIGURE 6 -ADJUSTING THE SEAT
DEPTH
Seat
Mounting
Positions
Seat
Swivel
Assembly
Seat
Stand
Slot
Slot
Shorter
Mounting
Screws
Lockwasher
Washer
Swivel
Lever
Cutout
Cutout
Longer Mounting Screw
(NOTE: Only one (1) shown for clarity)
FIGURE 7 - USING THE
ADJUSTABLE SEAT SLIDE
Release
Lever
Seat