Invacare LYNX LX-3PLUS EU - Manual (Page 53)

Part No. 1090132 Rev F 53 Invacare Scooters
WARNING
When reassembling scooter, ensure retaining pin is properly engaged securing
the front and rear frame together. Otherwise, injury and/or damage may
result.
9. Pull retaining pin that secures the rear frame and front frame assemblies together (FIGURE
2).
10. Separate front frame assembly from the rear frame assembly (FIGURE 2).
11. Fold tiller down. Refer to TILLER ANGLE ADJUSTMENT in PROCEDURE 8 of this manual.
PROCEDURE 10 TRANSPORT
TRANSPORT
FIGURE 2 - TRANSPORTING THE SCOOTER
STEPS 8 AND 9 FOR ALL MODELS EXCEPT ZOOM-3
Retaining
Pin
Rear Frame
Assembly
Front Frame
Assembly
Rear
Shroud
Seat
Front Basket
DISASSEMBLED VIEW
Batteries
Rear Sub-Frame
Assembly
Front Sub-Frame
Assembly
ALL MODELS EXCEPT ZOOM-3
ZOOM-3
One Piece
Frame Assembly