Icom I706MKTMG - Manual (Page 51)

48
7
SET MODE
Q4 RTTY KEYING
(RTTY only)
This item adjusts the RTTY keying. Normal or
reverse keying can be selected. The default is “n,” normal.
Normal : key open=mark
Reverse : key open=space
RTTY
■ Quick set mode items
Q1 RF POWER
(all modes)
This item adjusts the RF output power. The RF out-
put power can be adjusted from L, 1 to 9 and H for
indication, however, it can be adjusted continuously.
Q2 MIC GAIN
(SSB/AM/FM only)
This item adjusts microphone gain from 1 to 10 for
indication, however, it can be adjusted continuously.
The default is 5.
Note that while adjusting mic gain, the
ALC meter is displayed automatically.
The default is H (maximum power).
Note that while adjusting the output
power, the power meter is displayed
automatically.
Q2 CW PITCH
(CW only)
This item adjusts the CW pitch. CW pitch is
adjustable from 300 to 900 Hz in 10 Hz steps.
The default is 600 Hz.
CW
Q2 RTTY TONE
(RTTY only)
This item selects the RTTY tone. RTTY tone is tog-
gled between 1275, 1615 and 2125 Hz.
The default is 2125 Hz.
RTTY
Q3 VOX DELAY
(SSB/AM/FM only)
This item adjusts the VOX (Voice-activated Transmit)
delay time. The delay time can be adjusted from 0 to
2 sec. in 0.1 sec. units.
The default is 1.0 seconds.
USB
Q3 BK-IN DELAY
(CW only)
This item adjusts break-in delay time for CW semi
break-in operation. The delay time is selectable from
2.0 to 13.0 (dots).
The default is 7.5 dots.
CW
Q3 RTTY SHIFT
(RTTY only)
This item adjusts the RTTY shift. There are 3 selec-
table values: 170, 200 and 425 Hz.
The default is 170 Hz.
RTTY
Q4 VOX GAIN
(SSB/AM/FM only)
This item adjusts the VOX gain for the VOX (voice
activated transmit) function.
USB
The default is 5.