Icom I706MKTMG - Manual (Page 57)

54
29 9600 MODE
(Data socket speed)
This is used to change the communications speed
packet operation. The data socket can be set to 1200
or 9600 baud.
Default is 9600 baud.
30 VSEND SEL
(ACC socket output)
“on”: VSEND is for 144/430 MHz; HSEND is for
the HF/50 MHz
“U only”: VSEND is for 430 MHz; HSEND is for
HF/50/144 MHz
“oFF”: VSEND is not used; HSEND is for all
bands.
The default is VSEND is for the 144/430 MHz band;
HSEND is for the HF/50 MHz band.
31 SPEECH LANG
When the optional UT-102 VOICE SYNTHESIZER UNIT is
installed, you can select between English and
Japanese as the language.
32 SPEECH SPD
When the optional UT-102
VOICE SYNTHESIZER UNIT
is
installed, you can select between faster or slower
synthesizer output.
Voice synthesizer functions
in English (default). Voice synthesizer functions
in Japanese.
Voice synthesizer output
is faster (default). Voice synthesizer output
is slower.
(voice synthesizer language)
(voice synthesizer speed)
28 PTT TUNE
(PTT tune function)
When an optional AH-4
ANTENNA TUNER
is connect-
ed, tuning can be started automatically at the
moment the PTT is pushed.
27 A-TUNE STRT
(auto tuner start)
The optional AT-180 ANTENNA TUNER has an auto-
matic start capability which starts tuning if the SWR
is higher than 1.5–3.
When “oFF” is selected, the tuner remains OFF even
when the SWR is poor (1.5–3).
When “on” is selected, automatic tune starts even
when the tuner is turned OFF.
Note: Even when “on” is selected, automatic tune
does not start for the 50 MHz band.
Auto tune function OFF
(default). Auto tune function ON.
Tuning starts when pushing [PTT]
on a new frequency. Tuning starts only when
[TUNER] is pushed (default).
7
SET MODE