Coping with everyday obstacles – Invacare Wheelchair Pronto M91 Base User Manual

Page 21

Advertising
background image

SECTION 3—SAFETY/HANDLING OF WHEELCHAIRS

Part No 1143153

21

Pronto® M91™Base with SureStep®

ƽ WARNING

Many activities require the wheelchair user to reach, bend and transfer in and out of

the wheelchair. These movements will cause a change to the normal balance,

center of gravity, and weight distribution of the wheelchair. To determine and

establish your particular safety limits, practice bending, reaching and transferring

activities in several combinations in the presence of a qualified healthcare

professional BEFORE attempting active use of the wheelchair.
The Pronto M91 wheelchairs have the following weight limitations:

To assure stability and proper operation of your wheelchair, you must at all times 
maintain proper balance. Your wheelchair has been designed to remain upright and 
stable during normal daily activities as long as you do not move beyond the center of 
gravity. DO NOT lean forward out of the wheelchair any further than the length of the 
armrests.

Coping With Everyday Obstacles

NOTE: For this procedure, refer to 
FIGURE 3.1.

Coping with the irritation of everyday 
obstacles can be alleviated somewhat by 
learning how to manage your wheelchair. 
Keep in mind your center of gravity to 
maintain stability and balance.

FIGURE 3.1 Coping With Everyday

Obstacles

While the walking beam allows to traverse up to a 3‐inch bump or threshold, stopping 
after the wheels cross the bump poses a problem. The wheelchair cannot reverse over the 
bump at this point. Continue forward and then turn around.

While the M91 is designed for use primarily in and around the home, the provider should 
determine whether this wheelchair is suitable for the actual environment the wheelchair 
will be used in.

DO NOT go down ramp at full speed. Some seat/back positions will cause wheelchair to 
feel unstable.

CAUTION

Be aware of condition of ramp. Traction will be diminished/nonexistent on a slip-

pery surface. Proceed with caution.

MODEL

WEIGHT LIMITATION

STANDARD

300 lb

HEAVY DUTY

400 lb

3-inch Bump

or Threshold

Advertising