Section 5—wheelchair operation, Operating the wheelchair, Turning the power on/off – Invacare Wheelchair Pronto M91 Base User Manual
Page 32
SECTION 5—WHEELCHAIR OPERATION
Pronto® M91™Base with SureStep®
32
SECTION 5—WHEELCHAIR
OPERATION
ƽ WARNING
After ANY adjustments, repair or service and before use, make sure that all
attaching hardware is tightened securely - otherwise injury or damage may result.
Set-up of the Electronic Control Unit is to be performed only by a qualified techni-
cian. The final adjustments of the controller may affect other activities of the wheel-
chair. Damage to the equipment could occur under these circumstances.
Operating the Wheelchair
Turning the Power On/Off
NOTE: For this procedure, refer to FIGURE 5.1.
1. To turn the power On, perform one of the following steps:
2. Turning the power Off can be achieved by performing one of the following steps:.
FIGURE 5.1 Turning the Power On/Off
JOYSTICK
ACTION
MPJ™+
Move the On/Off switch Forward to the On position.
SPJ™+
Press the On/Off button.
JOYSTICK
ACTION
MPJ+
Move the On/Off switch Back to the Off position.
SPJ+
Press the On/Off button.
MPJ+ Joystick
On/Off
Switch
SPJ+ Joysticks
On/Off
Button