Invacare Wheelchair Pronto M91 Base - Manual (Page 40)

SECTION 5—WHEELCHAIR OPERATION
Pronto® M91™Base with SureStep® 40 Part No 1143153
FIGURE 5.6 LCD Display Screens - Main Screen
Driving Screen
NOTE: For this procedure, refer to
FIGURE 5.7.
This screen is shown when the operator
issues a drive command and the Drive Icon
on the main screen was highlighted.
NOTE: The Drive’s name, warning/info
message, status icon and battery indicator are
displayed on this screen.
FIGURE 5.7 LCD Display Screens - Driving
Screen
Connected Devices Screen
NOTE: For this procedure, refer to FIGURE 5.8.
This screen is displayed if the Mode Select switch is held active for about 10 seconds. This
screen shows an icon that represents any additional devices that are connected to the
chair.
Available Modes in
this Drive (Must be
Programmed)
ECU
Drive Indicator
Icon appears when a
joystick command
will drive the
wheelchair
Battery Gauge Display
Status/Info
Message Area
Status
Indicator
Drive Profile Name