Installing impact guards/calf strap/h-calf strap – Invacare Compass SPT PH904A User Manual
Page 39
Advertising
SECTION 4—FRONT RIGGINGS
39
Installing Impact Guards/Calf Strap/H-Calf Strap
NOTE: For this procedure, refer to FIGURE 4.14.
NOTE: Impact guards are standard equipment on Model ST footrests. No assembly is required.
1. Remove impact guard/calf strap from packaged container.
2. Secure the impact guards to the footrest frame.
3. Secure the calf strap around the footrest frame (with the impact guards attached).
FIGURE 4.14 Installing Impact Guards/Calf Strap/H-Calf Strap
H-Calf
Strap
Calf
Strap
Impact Guard
Advertising
This manual is related to the following products: