Invacare Compass SPT PH904A - Manual (Page 48)

SECTION 6—BACK/SEAT
Compass™SPT™ 48 Part No 1122134
Installing and Removing a Seating System
ƽ WARNING
Invacare products are specifically designed and manufactured for use in conjunction
with Invacare accessories. Accessories designed by other manufacturers have not
been tested by Invacare and are not recommended for use with Invacare products.
1. Ensure that the seating system is compatible with this wheelchair.
2. Refer to the seating system Ownerʹs Manual for installation and removal.
Installing Stroller Handle
NOTE: For this procedure, refer to FIGURE 6.2.
1. Remove the plug buttons from both back canes, if necessary.
2. Slide the stroller handle into the back canes.
3. Align the mounting holes of the stroller handle and the back canes.
4. Press the button on the quick-release pin and insert the quick-release pin through the
back cane and stroller handle.
5. Release the button on the quick-release pin.
6. Pull on the stroller handle to make sure it is locked securely in place.
FIGURE 6.2 Installing Stroller Handle
Stroller Handle
Mounting Holes
Back Cane
Quick-Release Pin
Button