Invacare Compass SPT PH904A - Manual (Page 44)

SECTION 5—ARMS
Compass™SPT™ 44 Part No 1122134
Adjusting T-Arm Width
NOTE: For this procedure, refer to FIGURE 5.5.
1. Remove the two mounting screws that
secure the arm pad to the arm tube.
2. Turn the arm pad around and
reposition the arm pad on the arm tube.
3. Re-secure the arm pad to the arm tube
with the two mounting screws. Tighten
securely.
4. Repeat for the opposite side, if
necessary.
FIGURE 5.5 Adjusting T-Arm Width
Adjusting T-Arm Depth
NOTE: For this procedure, refer to FIGURE 5.6.
1. Remove the two mounting screws that secure the arm pad to the arm tube.
2. Remove the two socket screws that secure the arm tube to the T-Arm post.
3. Reposition the arm tube on the T-Arm post:
A. Desk Length Arms - to one of three
positions depending on the desired
arm pad depth.
B. Full Length Arms - to one of five
positions depending on the desired
arm pad depth.
NOTE: Two additional positions are
obtainable by turning the arm tube 180°.
4. Re-secure the arm tube to the T-Arm
post with the two socket screws.
Torque to 60-70 in.-lbs.
5. Reattach the arm pad to the arm tube
with the two mounting screws. Tighten
securely.
FIGURE 5.6 Adjusting T-Arm Depth
6. Repeat for the opposite side, if necessary.
Mounting
Screw
Arm Tube
Mounting
Screw
Arm Pad
Socket
Screws
Arm Pad
Mounting
Screw
T-Arm Post
Arm Tube
Mounting Screw