IXLA 640 User Manual
The flash does not work.
The flash is turned off.
Toggle the flash button to the Flash
The flash is still recharging
Wait for the flash to recharge. When
it is ready, the Flash display light
The photo is blurred.
Either you or the subject moved
while you were taking the photo.
The lens is dirty.
Clean the lens and try again.
The subject was too close for the
Stand at least 3 feet (one meter)
from the subject.
The photo has jagged edges.
The monitor is set at low
Adjust your monitor display settings
according to the instructions on page
The photo has been enlarged for
printing and the print quality is
Reduce the size of the photo to 6 x 4
inches (w x h).
Digital SuperPro 640
6 Tips and troubleshooting