JVC LVT1627-001A - Manual (Page 218)

ENGLISH
92
Menu items Selectable settings (Initial setting)
Setup
]
Disc
*4
Monitor Type Select the monitor type to watch a wide screen picture.
16:9: Select when the aspect ratio of the external monitor
is 16:9.
4:3 Letter Box/4:3 Pan Scan: Select when the
aspect ratio of the external monitor is 4:3. Refer to the
illustrations on the left to see how the pictures are shown
on the monitor.
16:9 4:3 Letter Box
4:3 Pan Scan
OSD Position Select the position of the on-screen bar. ☞ [68]
1: Higher position
2: Lower position
Position 1 Position 2
File Type Select playback file type when a disc contains different
types of files.
Audio: Plays back audio files.
Still Picture: Plays back JPEG files.
Video: Plays back DivX/MPEG files.
D. Audio Output Select the signal format to be emitted through the
DIGITAL OUT (Optical) terminal on the rear. For details,
☞ [106].
Off: No signal is output from the terminal.
PCM Only: Select this when connecting an amplifier or a
decoder incompatible with Dolby Digital, DTS or MPEG
Audio, or connecting to a recording device.
Dolby Digital/PCM: Select this when connecting an
amplifier or a decoder compatible with Dolby Digital.
Stream/PCM: Select this when connecting an amplifier
or a decoder compatible with Dolby Digital, DTS, and
MPEG Audio.
Down Mix When playing back a multi-channel DVD disc, this setting
affects the signals reproduced through the LINE OUT jacks
(and through the DIGITAL OUT terminal when PCM
Only is selected for D. Audio Output).
Surround Compat.: Select this when you want to enjoy
multichannel surround audio by connecting an amplifier
compatible with Dolby Surround to this receiver.
Stereo: Normally select this.
KDNX5000_E_eng.indb 92 KDNX5000_E_eng.indb 92 14/2/07 10:00:01 pm 14/2/07 10:00:01 pm