JVC LVT1627-001A - Manual (Page 222)

ENGLISH
96
Menu items Selectable settings (Initial setting)
Sound
High Pass Filter Through: Select when the subwoofer is not connected.
On: Select when the subwoofer is connected.
Crossover Adjust the crossover frequency between the front/rear
speakers and the subwoofer.
55 Hz, 85 Hz, 125 Hz
Amplifier Gain You can change the maximum volume level of this
receiver.
Amplifier Off: Deactivates the built-in amplifier.
Low Power: Volume 00 to 30 (Select this if the maximum
power of the speakers is less than 50 W)
High Power: Volume 00 to 50
Screen Control/
Picture [Disc]/
Picture [Video]
You can adjust the monitor to make it clear and legible.
• While picture from VIDEO IN is displayed, you can
adjust the playback picture of VIDEO IN (Picture
[Video]).
• While DISC is selected as the source and playback
picture is displayed, you can adjust the playback picture
of DISC (Picture [Disc]).
• For other screens than above, Screen Control
appears. *15
Bright *16 : Adjust if the picture is too bright or too dark.
–15 to +15 (00)
Color Temp.: Adjust the colour temperature of the
picture—warmer or cooler. –15 to +15 (00)
Contrast: Adjust the contrast. –15 to +15 (00)
Tint: Adjust the tint if the human skin colour is unnatural.
–15 to +15 (00)
• Tint is adjustable only for VIDEO IN signal in NTSC
and discs in NTSC.
*15 The settings of Screen Control are also applied to the map screen and screens of Navigation Menus.
*16 This setting in Screen Control is shared with Brightness setting in Setup Menu (☞ [44]).
Screen Control
Exit
+03
Bright
KDNX5000_3_audio_d_E.indd 96 KDNX5000_3_audio_d_E.indd 96 17/2/07 10:19:22 pm 17/2/07 10:19:22 pm