JVC LVT1627-001A - Manual (Page 220)

ENGLISH
94
Menu items Selectable settings (Initial setting)
Setup
]
Input
External Input *8 When connecting an external component to the CD
changer jack on the rear.
Changer: CD changer, iPod, or D. player.
Ext Input: Any other than the above.
• For connecting the DAB tuner or the Bluetooth Adapter,
this setting is not required. It is automatically detected.
Video Input *9 You can determine the use of the VIDEO IN plug. ☞ [82]
Off: Select if no component is connected. (Video input is
skipped while changing the display with DISP key.)
Video: Select when connecting an AV component such as
VCR.
Camera: Select when connecting a camera.
For
Camera
Interlock Off: Cancels.
Reverse: Automatically switch to the camera view when
the gear is shifted into reverse. *10
Low Speed: Automatically switch to the camera view
when your car slows down. *11
Horizontal/
Vertical Horizontal adjustment is required according to how you
would like to see the picture on the monitor. Vertical
adjustment is required according to how you have installed
your camera.
Horizontal: Normal Horizontal: Reverse
Vertical:
Normal
Vertical:
Reverse
Video Format *12 Select the format of video input according to the colour
system of the component connected to the VIDEO IN
plug.
NTSC, PAL
*8 Not selectable when the component connected to the CD changer jack is selected as the source.
*9 Not selectable when “EXT-IN” is selected as the source.
*10 Reverse lamp lead connection is required. (☞ Installation/Connection Manual)
*11 Speed signal lead connection is required. (☞ Installation/Connection Manual)
*12 Not selectable when Video Input is set to Off.
KDNX5000_E_eng.indb 94 KDNX5000_E_eng.indb 94 14/2/07 10:00:02 pm 14/2/07 10:00:02 pm