JVC LVT1627-001A - Manual (Page 225)

99 Sound equalization / Additional information
Additional Information
General
• There is a time limit for some operations.
In this case, if no further operation is done
for a certain period, the current operation is
canceled.
• By pressing SRC or MAP on the unit, you
can also turn on the power. The map screen
is displayed at turn-on if you press MAP, and
an AV screen if you press SRC. If the source is
ready, playback starts.
• You cannot select some sources if they are not
ready.
– DAB/CD-CH/iPod/D. PLAYER: cannot
be selected without connecting the target
source component.
– DISC: cannot be selected if a disc is not in
the loading slot.
– EXT-IN: cannot be selected without
selecting Ext Input for the External
Input setting. (☞ [94])
– Bluetooth Audio: cannot be selected if a
Bluetooth adapter is not connected.
• If you turn off the power while DISC is
selected as the source, disc play will start
automatically next time you turn on the
power.
• The voltage and the speed on the vehicle
information screen may be different from the
actual values.
Listening to the radio
Storing stations in memory
• When SSM is over, all previously stored
stations are erased and stations are stored
newly.
• When SSM is over, received stations are
preset in No. 1 (lowest frequency) to No. 6
(highest frequency), and preset station No. 1
is tuned in.
• When storing a station manually, a previously
preset station is erased when a new station is
stored in the same preset number.
RDS operations
• TA Standby Reception and PTY Standby
Reception will be cancelled temporarily in the
following cases:
– While recording a CD into the HDD.
– While copying the disc contents into the
HDD.
– While editing the HDD contents.
• If you want to know more about RDS, visit
<http://www.rds.org.uk>.
DAB operations
• Only the primary DAB service can be preset
even when you store a secondary service.
Disc operations
General
• In this manual, words “track” and “file” are
interchangeably used.
• This unit can also play back 8 cm discs.
• This unit can only play back audio CD
(CD-DA) files if different type of files are
recorded in the same disc.
• On some discs, the actual operations may
be different from what is explained in this
manual.
• This unit can display only one-byte
characters. No other characters can be
correctly displayed.
• Reverse search stops automatically when it
reaches the beginning of the disc. Playback
resumes at normal speed.
• No sound comes out during slow motion
playback. When playing a VCD, reverse slow
motion playback is prohibited.
• When playing a DVD/VCD, no sound comes
out during Search.
• For some DVDs and VCDs, changing the
subtitle language, audio language (or audio
channel) without using the disc menu is
prohibited.
KDNX5000_E_eng.indb 99 KDNX5000_E_eng.indb 99 14/2/07 10:00:07 pm 14/2/07 10:00:07 pm