Juniper Networks M7I - Manual (Page 102)

Tunnel Services PIC (M7i Router)
• Junos OS Release 6.0 and later Software release
• Power requirement: 0.07 A @ 48 V (3.4 W) Description
• Loopback function that encapsulates and de-encapsulates packets
• SONET/SDH OC12/STM4 tunneling bandwidth
Hardware features
For a list of the software features available for services PICs, see the Junos OS Services Interfaces
Configuration Guide.
• IP-IP unicast tunneling
• GRE unicast tunneling
• PIM sparse mode unicast tunneling
Software features
One tricolor:
• Off—Not enabled
• Green—Online with no alarms or failures
• Yellow—Online with alarms for remote failures
• Red—Active with a local alarm; router has detected a failure
LEDs
Related
Documentation
M7i PICs Description on page 3 •
• M7i PICs Supported on page 4
• M7i PIC/CFEB Compatibility on page 11
Copyright © 2010, Juniper Networks, Inc. 102
M7i Multiservice Edge Router PIC Guide