Juniper Networks M7I - Manual (Page 37)

• Loop timing
• Optical diagnostics
• AM1 or B8ZS line encoding
• APS/SDH MSP
• Fractional mode and framed clear channel mode
• Superframe (D4/SF) and extended superframe (ESP) framing
• Simple Network Management Protocol (SNMP):
• OC3 MIB
• T1 MIB
• ATM MIB (Junos OS Release 10.2 and later)
• Automatic protection switching (APS)
• Dynamic, arbitrary channel configuration
• Full bit error rate test (BERT)
• Encapsulations: Structure-agnostic time-division multiplexing (TDM) over packet (SAToP)
(RFC 4553)
• Pseudowire emulation edge-to-edge (PWE3) for ATM (RFC 4717) (Junos OS Release 9.6 and
later)
• ATM Pseudowire emulation edge-to-edge via dynamic labels (LDP, RSVP-TE) (Junos OS
Release 9.6 and later)
• Inverse mulitplexing (IMA) for ATM (Junos OS Release 10.0 and later)
• ATM QoS (Junos OS Release 10.2 and later):
• Per-virtual circuit (VC) and per-virtual path (VP) traffic shaping
• Unspecified bit rate (UBR) traffic shaping
• Fine-grained real-time variable bit rate (rtVBR) and real-time variable bit rate (nrtVBR)
traffic shaping
• Port-level egress shaping
• Constant bit rate (CBR)
• Policing on a per virtual circuit basis
• Independent peak cell rate (PCR) and sustained cell rate (SCR) policing
• Counting, tagging, or discard policing actions
Software features
• Duplex LC/PC connector (Rx and Tx)
• SONET/SDH OC3/STM1 SFPs:
• Multimode (model number: SFP-OC3-SR)
• Intermediate reach (IR-1) (model number: SFP-OC3-IR)
• Long reach (LR-1) (model number: SFP-OC3-LR)
Optical interface specifications—see SONET/SDH OC3/STM1 Optical Interface Specifications
Cables and connectors
37 Copyright © 2010, Juniper Networks, Inc.
Channelized OC3/STM1 Circuit Emulation PIC with SFP (M7i Router)