Gigabit ethernet iq pic with sfp (m7i router) – Juniper Networks M7I User Manual

Page 78

Advertising
background image

Gigabit Ethernet IQ PIC with SFP (M7i Router)

•

Junos OS Release 6.0 and later

Software release

•

One Gigabit Ethernet port

•

Power requirement: 0.46 A @ 48 V (22 W)

•

Intelligent queuing (IQ) PICs support fine-grained queuing per-logical interface.

Description

•

High-performance throughput at speeds up to 1 Gbps

•

Full-duplex mode

•

Large MTUs of up to 9192 bytes

Hardware features

•

Optical diagnostics and related alarms (Junos OS Release 8.2 and later)

•

Quality of service (QoS) per channel: Weighted round-robin (WRR), Random early drop (RED),
Weighted random early drop (WRED)

•

Virtual Router Redundancy Protocol (VRRP) support

•

802.1Q Virtual LANs

•

VLAN stacking and rewriting

•

MAC policing, accounting, and filters

•

Flexible Ethernet encapsulation

Software features

•

The Gigabit Ethernet IQ PICs use small form-factor pluggable tranceivers (SFPs) that allow
different interfaces to be used on the PIC. For information about installing and removing SFPs,
see the M7i Internet Router Hardware Guide.

•

Fiber-optic SFP transceivers:

•

Duplex LC/PC connector (RX and TX)

•

Small form-factor pluggable (SFP) transceivers:

•

1000Base-LH (model number: SFP-1GE-LH)

•

1000Base-LX (model number: SFP-1GE-LX)

•

1000Base-SX (model number: SFP-1GE-SX)

Optical interface specifications—see Gigabit Ethernet 1000BASE Optical Interface
Specifications

•

Copper SFP transceiver:

•

Connector: Four-pair, Category 5 shielded twisted pair connectivity through an RJ-45
connector

•

1000Base-T (model number: SFP-1-GE-T)

•

Pinout: MDI crossover

•

Copper interface specifications—see Gigabit Ethernet 1000BASE Optical Interface
Specifications

Cables and connectors

Copyright © 2010, Juniper Networks, Inc.

78

M7i Multiservice Edge Router PIC Guide

Advertising