Juniper Networks M7I User Manual
Page 32
•
T1—CLI configurable as AMI or B8ZS
•
E1—HDB3
•
Encapsulations:
•
Circuit cross-connect (CCC)
•
Translational cross-connect (TCC)
•
Extended Frame Relay for CCC and TCC
•
Flexible Frame Relay
•
Frame Relay
•
Frame Relay for CCC
•
Frame Relay for TCC
•
Frame Relay port CCC
•
High-Level Data Link Control (HDLC)
•
HDLC framing for CCC
•
HDLC framing for TCC
•
MPLS CCC
•
MPLS TCC
•
Point-to-Point Protocol (PPP)
•
PPP for CCC
•
PPP for TCC
•
Encapsulations available only for DS0 and DS1:
•
Multilink Frame Relay end-to-end (MLFR FRF.15)
•
Multilink Frame Relay (MLFR) UNI NNI (MFR FRF.16)
•
Multilink PPP (MLPPP)
•
Encapsulations available only for DS1:
•
PPP over Frame Relay
•
120-ohm RJ-48C connector (female)
Cables and connectors
One tricolor per port:
•
Off—Not enabled
•
Green—Online with no alarms or failures
•
Yellow—Online with alarms for remote failures
•
Red—Active with a local alarm; router has detected a failure
LEDs
Copyright © 2010, Juniper Networks, Inc.
32
M7i Multiservice Edge Router PIC Guide