Juniper Networks SRX 210 - Manual (Page 107)

}
interfaces {
ge-0/0/0 {
unit 0 {
family inet {
address 192.168.1.1/24;
}
}
}
lo0 {
unit 0 {
family inet {
address 172.16.1.24/32;
}
}
}
}
18. Commit the configuration to activate it on the device.
[edit]
admin@# commit
19. Optionally, configure additional properties by adding the necessary configuration
statements. Then commit the changes to activate them on the device.
[edit]
admin@host# commit
20. When you have finished configuring the device, exit configuration mode.
[edit]
admin@host# exit
admin@host>
Related
Documentation
Connecting an SRX210 Services Gateway to the CLI Locally on page 79 •
• Connecting an SRX210 Services Gateway to the CLI Remotely on page 80
• SRX210 Services Gateway Software Configuration Overview on page 85
• SRX210 Services Gateway Secure Web Access Overview on page 95
Performing Initial Software Configuration on the SRX210 Services Gateway Using the
J-Web Interface
This topic includes the following sections:
• Establishing Basic Connectivity on page 92
• Configuring Basic System Properties on page 93
91 Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Performing Initial Software Configuration on the SRX210 Services Gateway