Juniper Networks SRX 210 - Manual (Page 159)

APPENDIX C
SRX210 Services Gateway Interface Cable
Specifications and Connector Pinouts
The network interfaces supported on the services gateway accept different types of
network cables.
This appendix includes the following topics:
• Interface Cable and Wire Specifications for the SRX210 Services Gateway on page 143
• RJ-45 Connector Pinouts for the SRX210 Services Gateway Ethernet Port on page 144
• RJ-45 Connector Pinouts for the SRX210 Services Gateway Console Port on page 145
Interface Cable and Wire Specifications for the SRX210 Services Gateway
Table 43 on page 143 lists the specifications for the cables that connect to ports.
Table 43: Cable and Wire Specifications for Ports
Device
Receptacle Maximum
Length
Cable/Wire Required Cable Specification Port
RJ-45 6 ft (1.83 m) One 6-ft (1.83-m) length
with DB-9/RJ-45
connectors RS-232 (EIA-232) serial
cable Console
port
RJ-45 328 ft
(100 m) One 15-ft (4.57-m)
length with RJ-45/RJ-45
connectors CAT-5e (Category 5)
cable or equivalent
suitable for 100BASE-T
operation Ethernet
port
Related
Documentation
RJ-45 Connector Pinouts for the SRX210 Services Gateway Ethernet Port on page 144 •
• RJ-45 Connector Pinouts for the SRX210 Services Gateway Console Port on page 145
• SRX210 Services Gateway Front Panel and Back Panel Views (Low Memory, High
Memory, and PoE Versions) on page 9
143 Copyright © 2013, Juniper Networks, Inc.