Juniper Networks SRX 210 User Manual

Page 122

Advertising
background image

Table 38: SRX210 Services Gateway Chassis Alarm Conditions and
Corrective Actions

Alarm
Severity

Action

Alarm Condition

Component

Amber
(minor)

•

If the internal flash memory fails at startup,
the services gateway automatically boots
from the alternative boot device (USB
storage device).

NOTE:

If you configured your services

gateway to boot from an alternative boot
device, ignore this alarm condition.

•

Reformat the internal flash memory, and
install a bootable image. (See the

Initial

Configuration for Security Devices

and

Monitoring and Troubleshooting for
Security Devices

.)

•

If you did not configure the services
gateway to boot from an alternative boot
device, contact Juniper Networks Technical
Assistance Center (JTAC). See

“Juniper

Networks Technical Assistance Center” on
page 110

.

The services
gateway boots from
an alternate boot
device.

Boot media

Red
(major)

•

Contact the Juniper Networks Technical
Assistance Center (JTAC). See

“Juniper

Networks Technical Assistance Center” on
page 110

.

•

If you must replace the failed Mini-PIM, see
the

SRX Series Services Gateways for

the Branch Physical Interface Modules
Hardware Guide

for information about

replacing the Mini-PIMs.

A Mini-PIM has
failed.

Mini-Physical
Interface
Module
(Mini-PIM)

Copyright © 2013, Juniper Networks, Inc.

106

SRX210 Services Gateway Hardware Guide

Advertising