JVC HR-IP820U - Manual (Page 15)

15
COMPARE CHANNEL NUMBERS
Most TV listings will have a chart indicating the "Guide Channel"
number that each TV station has been assigned for purposes of
VCR Plus+ programming. Check in your TV listing and see
whether that number is the same as the channel number you receive
that station on with your VCR or Cable Box.*
If the numbers match , you don't have to do anything. You can
go directly to "Timer-Recording with VCR Plus+" p. 26.
If there are stations where the numbers are different, and
you want to be able to timer-record them
, you will have to
"tell" the VCR about the mismatch. Go to step 1.
If there are stations where the numbers are different, but
you don't want to timer-record them
, you can go directly to
"Timer-Recording with VCR Plus+" p. 26.
* SPECIAL NOTE FOR CABLE
SUBSCRIBERS
Ⅲ In many instances, cable TV stations have VCR Plus+ Guide
Channel numbers that DO NOT match the actual channel
number the station is received on. Check your TV listing, or
check with your cable supplier for details.
Ⅲ In many instances, normal broadcast TV stations can be viewed
on cable. Check your TV listing, or check with your cable
supplier for details.
Setting up the VCR Plus+ feature
Depending on the broadcast stations that are receivable in your area, or the cable stations offered by your cable supplier, you may have
to make certain changes in your VCR's "Guide Channel Set" menu to get proper results. Please read on and find out what you need
(and don't need) to do. (After host station scanning, Guide Channel Setting is accomplished automatically, so there's no need for you
to do it manually. Refer to page 6 of the INDEX Plus+manual).
Make sure that you have already...
set the VCR's clock
set the VCR's tuner.
set the Cable Box Controller (
੬
p. 12) if using a Cable Box.
(If NOT using Cable Box)
(If using Cable Box)
TURN ON THE VCR
1 If the VCR is off, press POWER to turn it on.
Ⅲ If watching on channel 3 or 4, press TV/VIDEO to select
the video mode. The VCR's VIDEO indicator will light.
ACCESS THE ON-SCREEN MENU
2 Press MENU, SET and SELECT as many times as necessary
to access the "TUNER SET" screen. (
੬
p.7)
3 Press SET to move the cursor to "GUIDE CHANNEL SET",
and then press SELECT.
Ⅲ The Guide Channel Set screen will appear.
Ⅲ If you have set the Cable Box Controller feature CABLE
CH is displayed instead of VCR CH.
(Continued on next page.)
Then...
+
– 00 00 00 00 00 00 00 00 00 00 0
00 00 00 00 00 00 00 00 00 00 0
VCR
Example of
non-matching channels
Example of
non-matching channels
Cable Box
TUNER SET
BAND
AFC
AUTO CHANNEL SET
MANUAL CHANNEL SET
Ł GUIDE CHANNEL SET
GUIDE CHANNEL MAP
PRESS (SELECT, SET +/–)
PRESS (MENU) TO END
GUIDE CHANNEL SET
GUIDE CH: VCR CH
1 : 1
PRESS
PR (SELECT, SET +/–, DIGIT)
PRESS (MENU) TO END
GUIDE CHANNEL SET
GUIDE CH: CABLE CH
45 : 29
PRESS
PR (SELECT, SET +/–, DIGIT)
PRESS (MENU) TO END
Broadcast Station
VCR Plus+ Assigned
Guide Channel The channel your VCR
receives the station on
WNYB (TBN) 67 49
WSBK Boston, MA 15 38
WXTV Paterson, NJ 12 41
WNJU (Ind.) 6 47
WEDW Bridgeport, CT 14 49
WLIG Riverhead 10 55
WFXV (FOX) 33 28
Cable Station
VCR Plus+ Assigned
Guide Channel
The channel your
Cable Box receives the
station on
WNJU (Ind.) 6 8
WLIW (PBS) 21 34
Music Television 48 20
Cable News Network 42 27
Home Box Office 33 28
Cinemax 45 29
HR-IP820U-EN-1 97.5.20 5:25 PM Page 15